Deutz-Fahr DX 6.10 vs Renault 110-14 TS

10 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1986–1989

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the 110-14 TS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and Renault 110-14 TS, field by field
Field	DX 6.10	110-14 TS	Gap
Engine
Engine power, claimed claimed	98.2 hp	98.7 hp	—
Engine declared	KHD F6L 912.74	MWM D 226-6	differs
Displacement declared	5.65 L	6.23 L	+10% 110-14 TS
Maximum torque declared	263 lb·ft · 356 N·m	276 lb·ft · 374 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.6 L/min	11.5 gpm · 43.4 L/min	+28% DX 6.10
Three-point lift at ends declared	11,464 lb · 5,200 kg	16,006 lb · 7,260 kg	+40% 110-14 TS
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	11,464 lb · 5,200 kg	+9% 110-14 TS
Maximum permissible mass declared	14,991 lb · 6,800 kg	17,857 lb · 8,100 kg	+19% 110-14 TS
Wheelbase declared	106.4 in · 2,703 mm	107.9 in · 2,740 mm	—
Length declared	179.1 in · 4,550 mm	181.2 in · 4,603 mm	—
Width declared	90.7 in · 2,304 mm	80.9 in · 2,055 mm	+12% DX 6.10
Height declared	111.0 in · 2,820 mm	114.2 in · 2,900 mm	—
Ground clearance declared	20.1 in · 510 mm	16.6 in · 422 mm	+21% DX 6.10
Turning radius, braked declared	15.9 ft · 4.86 m	19.5 ft · 5.95 m	+22% 110-14 TS
Fuel tank declared	126.8 qt · 120 L	194.4 qt · 184.0 L	+53% 110-14 TS

Source

Source