Deutz-Fahr DX 6.10 vs New Holland TS 115 ES

9 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the TS 115 ES → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and New Holland TS 115 ES, field by field
Field	DX 6.10	TS 115 ES	Gap
Engine
Engine power, claimed claimed	98.2 hp	—	—
Engine declared	KHD F6L 912.74	New Holland 650 T/TJ or 675/TK	differs
Displacement declared	5.65 L	7.48 L	+32% TS 115 ES
Maximum torque declared	263 lb·ft · 356 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Electro-hydraulically operated wet multi-disc clutch as drive clutch	—
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.6 L/min	20.0 gpm · 75.8 L/min	+36% TS 115 ES
Pressure declared	—	2,857 psi · 197 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	12,302 lb · 5,580 kg	+7% TS 115 ES
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	10,587 lb · 4,802 kg	—
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% TS 115 ES
Wheelbase declared	106.4 in · 2,703 mm	103.3 in · 2,623 mm	—
Length declared	179.1 in · 4,550 mm	173.1 in · 4,397 mm	—
Width declared	90.7 in · 2,304 mm	85.8 in · 2,180 mm	+6% DX 6.10
Height declared	111.0 in · 2,820 mm	109.8 in · 2,788 mm	—
Ground clearance declared	20.1 in · 510 mm	16.5 in · 418 mm	+22% DX 6.10
Turning radius, braked declared	15.9 ft · 4.86 m	—	—
Fuel tank declared	126.8 qt · 120 L	209.2 qt · 198.0 L	+65% TS 115 ES

Source

Source