Deutz-Fahr DX 6.10 vs Massey Ferguson MF 6160 (A)

11 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the MF 6160 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and Massey Ferguson MF 6160 (A), field by field
Field	DX 6.10	MF 6160 (A)	Gap
Engine
Engine power, claimed claimed	98.2 hp	98.7 hp	—
Engine declared	KHD F6L 912.74	Perkins 1006.6 HR-4	differs
Displacement declared	5.65 L	5.99 L	+6% MF 6160 (A)
Maximum torque declared	263 lb·ft · 356 N·m	280 lb·ft · 379 N·m	+6% MF 6160 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.6 L/min	13.3 gpm · 50.4 L/min	+10% DX 6.10
Three-point lift at ends declared	11,464 lb · 5,200 kg	10,296 lb · 4,670 kg	+11% DX 6.10
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	9,722 lb · 4,410 kg	+8% DX 6.10
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% MF 6160 (A)
Wheelbase declared	106.4 in · 2,703 mm	106.1 in · 2,695 mm	—
Length declared	179.1 in · 4,550 mm	170.2 in · 4,323 mm	—
Width declared	90.7 in · 2,304 mm	74.8 in · 1,899 mm	+21% DX 6.10
Height declared	111.0 in · 2,820 mm	109.2 in · 2,774 mm	—
Ground clearance declared	20.1 in · 510 mm	18.0 in · 457 mm	+12% DX 6.10
Turning radius, braked declared	15.9 ft · 4.86 m	—	—
Fuel tank declared	126.8 qt · 120 L	182.8 qt · 173.0 L	+44% MF 6160 (A)

Source

Source