Deutz-Fahr DX 6.10 vs Lamborghini 950 DT

15 material differences

Tractor one

1983–1990

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the 950 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and Lamborghini 950 DT, field by field
Field	DX 6.10	950 DT	Gap
Engine
Engine power, claimed claimed	98.2 hp	93.6 hp	—
Engine declared	KHD F6L 912.74	SAME H-1000.4 WT-2	differs
Displacement declared	5.65 L	4.00 L	+41% DX 6.10
Maximum torque declared	263 lb·ft · 356 N·m	243 lb·ft · 329 N·m	+8% DX 6.10
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry S.L.H. single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	14.7 gpm · 55.6 L/min	16.1 gpm · 61.0 L/min	+10% 950 DT
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	7,937 lb · 3,600 kg	+44% DX 6.10
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	9,436 lb · 4,280 kg	+11% DX 6.10
Maximum permissible mass declared	14,991 lb · 6,800 kg	13,228 lb · 6,000 kg	+13% DX 6.10
Wheelbase declared	106.4 in · 2,703 mm	93.4 in · 2,373 mm	+14% DX 6.10
Length declared	179.1 in · 4,550 mm	149.0 in · 3,785 mm	+20% DX 6.10
Width declared	90.7 in · 2,304 mm	72.4 in · 1,840 mm	+25% DX 6.10
Height declared	111.0 in · 2,820 mm	106.1 in · 2,695 mm	—
Ground clearance declared	20.1 in · 510 mm	17.5 in · 445 mm	+15% DX 6.10
Turning radius, braked declared	15.9 ft · 4.86 m	13.4 ft · 4.07 m	+19% DX 6.10
Fuel tank declared	126.8 qt · 120 L	158.5 qt · 150.0 L	+25% 950 DT

Source

Source