Deutz-Fahr DX 6.10 vs Fiat 1000 Super (TD)

11 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1976–1979

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the 1000 Super (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and Fiat 1000 Super (TD), field by field
Field	DX 6.10	1000 Super (TD)	Gap
Engine
Engine power, claimed claimed	98.2 hp	108.5 hp	+11% 1000 Super (TD)
Engine declared	KHD F6L 912.74	FIAT-IVECO 8065.04.207	differs
Displacement declared	5.65 L	5.50 L	—
Maximum torque declared	263 lb·ft · 356 N·m	268 lb·ft · 364 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.6 L/min	—	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	7,055 lb · 3,200 kg	+63% DX 6.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	7,981 lb · 3,620 kg	+31% DX 6.10
Maximum permissible mass declared	14,991 lb · 6,800 kg	14,065 lb · 6,380 kg	+7% DX 6.10
Wheelbase declared	106.4 in · 2,703 mm	97.6 in · 2,480 mm	+9% DX 6.10
Length declared	179.1 in · 4,550 mm	164.6 in · 4,180 mm	+9% DX 6.10
Width declared	90.7 in · 2,304 mm	76.0 in · 1,930 mm	+19% DX 6.10
Height declared	111.0 in · 2,820 mm	93.3 in · 2,370 mm	+19% DX 6.10
Ground clearance declared	20.1 in · 510 mm	22.8 in · 580 mm	+14% 1000 Super (TD)
Turning radius, braked declared	15.9 ft · 4.86 m	13.1 ft · 4.00 m	+22% DX 6.10
Fuel tank declared	126.8 qt · 120 L	124.7 qt · 118.0 L	—

Source

Source