8 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoVALMET 80001991–1996No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 8000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and VALMET 8000, field by field
Field	DX 6.05	8000	Gap
Engine
Engine power, claimed claimed	97 hp	96.7 hp	—
Engine declared	KHD F6L 912	VALMET 620 D	differs
Displacement declared	5.65 L	6.59 L	+17% 8000
Maximum torque declared	266 lb·ft · 360 N·m	270 lb·ft · 366 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	17.5 gpm · 66.4 L/min	+36% 8000
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	10,053 lb · 4,560 kg	—
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% 8000
Wheelbase declared	105.0 in · 2,667 mm	100.7 in · 2,558 mm	—
Length declared	175.7 in · 4,464 mm	186.6 in · 4,740 mm	+6% 8000
Width declared	87.0 in · 2,210 mm	85.4 in · 2,170 mm	—
Height, over the cab declared	106.7 in · 2,710 mm	107.1 in · 2,720 mm	—
Ground clearance declared	17.9 in · 455 mm	14.0 in · 355 mm	+28% DX 6.05
Turning radius, braked declared	16.0 ft · 4.87 m	15.5 ft · 4.71 m	—
Fuel tank declared	137.4 qt · 130 L	167.0 qt · 158.0 L	+22% 8000

Source

Source