Deutz-Fahr DX 6.05 vs Steyr 8110 (a)

10 material differences · fewer than 12

Tractor one

1987–1991

No measured PTO figure

Tractor two

from 1984

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 8110 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Steyr 8110 (a), field by field
Field	DX 6.05	8110 (a)	Gap
Engine
Engine power, claimed claimed	97 hp	88.8 hp	+9% DX 6.05
Engine declared	KHD F6L 912	Steyr WD-611.43	differs
Displacement declared	5.65 L	5.18 L	+9% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	238 lb·ft · 323 N·m	+11% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	—	—
Pressure declared	3,481 psi · 240 bar	3,553 psi · 245 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	10,582 lb · 4,800 kg	+8% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	8,576 lb · 3,890 kg	+16% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	98.8 in · 2,509 mm	+6% DX 6.05
Length declared	175.7 in · 4,464 mm	163.4 in · 4,150 mm	+8% DX 6.05
Width declared	87.0 in · 2,210 mm	76.4 in · 1,940 mm	+14% DX 6.05
Height declared	106.7 in · 2,710 mm	103.4 in · 2,626 mm	—
Ground clearance declared	17.9 in · 455 mm	—	—
Turning radius, braked declared	16.0 ft · 4.87 m	12.1 ft · 3.70 m	+32% DX 6.05
Fuel tank declared	137.4 qt · 130 L	128.9 qt · 122.0 L	+7% DX 6.05

Source

Source