14 material differences

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoSAME Laser 100 (DT)1986–1991No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the Laser 100 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and SAME Laser 100 (DT), field by field
Field	DX 6.05	Laser 100 (DT)	Gap
Engine
Engine power, claimed claimed	97 hp	96.7 hp	—
Engine declared	KHD F6L 912	SAME 1055-P	differs
Displacement declared	5.65 L	5.20 L	+9% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	242 lb·ft · 328 N·m	+10% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.9 gpm · 48.8 L/min	17.4 gpm · 66.0 L/min	+35% Laser 100 (DT)
Pressure declared	3,481 psi · 240 bar	1,740 psi · 120 bar	+100% DX 6.05
Three-point lift, at the coupling points declared	11,464 lb · 5,200 kg	10,141 lb · 4,600 kg	+13% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	8,686 lb · 3,940 kg	+15% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	103.0 in · 2,617 mm	—
Length declared	175.7 in · 4,464 mm	153.0 in · 3,885 mm	+15% DX 6.05
Width declared	87.0 in · 2,210 mm	77.0–101.1 in · 1,957–2,567 mm	differs
Height, over the cab declared	106.7 in · 2,710 mm	106.4 in · 2,702 mm	—
Ground clearance declared	17.9 in · 455 mm	20.7 in · 527 mm	+16% Laser 100 (DT)
Turning radius, braked declared	16.0 ft · 4.87 m	11.0 ft · 3.35 m	+45% DX 6.05
Fuel tank declared	137.4 qt · 130 L	126.8 qt · 120.0 L	+8% DX 6.05

Source

Source