Deutz-Fahr DX 6.05 vs Massey Ferguson MF 1085

15 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1973–1978

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the MF 1085 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Massey Ferguson MF 1085, field by field
Field	DX 6.05	MF 1085	Gap
Engine
Engine power, claimed claimed	97 hp	86.8 hp	+11% DX 6.05
Engine declared	KHD F6L 912	Perkins A 4.318	differs
Displacement declared	5.65 L	5.21 L	+8% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	256 lb·ft · 347 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	Pedal-operated dry LUK single-plate clutch with 305 mm diameter	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	7.0 gpm · 26.5 L/min	+84% DX 6.05
Pressure declared	3,481 psi · 240 bar	3,086 psi · 213 bar	+13% DX 6.05
Three-point lift at ends declared	11,464 lb · 5,200 kg	6,173 lb · 2,800 kg	+86% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	8,490 lb · 3,851 kg	+18% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	13,228 lb · 6,000 kg	+13% DX 6.05
Wheelbase declared	105.0 in · 2,667 mm	97.2 in · 2,470 mm	+8% DX 6.05
Length declared	175.7 in · 4,464 mm	153.9 in · 3,910 mm	+14% DX 6.05
Width declared	87.0 in · 2,210 mm	114.2 in · 2,900 mm	+31% MF 1085
Height declared	106.7 in · 2,710 mm	79.1 in · 2,010 mm	+35% DX 6.05
Ground clearance declared	17.9 in · 455 mm	16.5 in · 420 mm	+8% DX 6.05
Turning radius, braked declared	16.0 ft · 4.87 m	—	—
Fuel tank declared	137.4 qt · 130 L	179.6 qt · 170.0 L	+31% MF 1085

Source

Source