Deutz-Fahr DX 6.05 vs Leyland 2100
12 material differences
Which should you choose?
Read our verdict on the DX 6.05 and the 2100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 6.05 | 2100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 97 hp | 100.0 hp | — |
| Engine declared | KHD F6L 912 | LEYLAND-MOTORS 6/98 NT | differs |
| Displacement declared | 5.65 L | 5.66 L | — |
| Maximum torque declared | 266 lb·ft · 360 N·m | 276 lb·ft · 374 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Independent dry double clutch | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 12.9 gpm · 48.8 L/min | 11.0 gpm · 41.6 L/min | +17% DX 6.05 |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | 11,464 lb · 5,200 kg | 6,030 lb · 2,735 kg | +90% DX 6.05 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,987 lb · 4,530 kg | 8,911 lb · 4,042 kg | +12% DX 6.05 |
| Maximum permissible mass declared | 14,991 lb · 6,800 kg | — | — |
| Wheelbase declared | 105.0 in · 2,667 mm | 90.0 in · 2,286 mm | +17% DX 6.05 |
| Length declared | 175.7 in · 4,464 mm | 150.0 in · 3,810 mm | +17% DX 6.05 |
| Width declared | 87.0 in · 2,210 mm | 85.5 in · 2,172 mm | — |
| Height declared | 106.7 in · 2,710 mm | 98.8 in · 2,510 mm | +8% DX 6.05 |
| Ground clearance declared | 17.9 in · 455 mm | 15.8 in · 402 mm | +13% DX 6.05 |
| Turning radius, braked declared | 16.0 ft · 4.87 m | 12.4 ft · 3.77 m | +29% DX 6.05 |
| Fuel tank declared | 137.4 qt · 130 L | 72.1 qt · 68.2 L | +91% DX 6.05 |
Deutz-Fahr DX 6.05 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 6.05”
- Source: Traktorenlexikon, “Deutz-Fahr DX 110”
Leyland 2100 sources
Source
- Source: Traktorenlexikon, “Leyland 2100”