Deutz-Fahr DX 6.05 vs Lamborghini R 874-90 (DT)

14 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the R 874-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Lamborghini R 874-90 (DT), field by field
Field	DX 6.05	R 874-90 (DT)	Gap
Engine
Engine power, claimed claimed	97 hp	86.8 hp	+11% DX 6.05
Engine declared	KHD F6L 912	SAME 1000.4 WT	differs
Displacement declared	5.65 L	4.00 L	+41% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	225 lb·ft · 305 N·m	+18% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	10.4 gpm · 39.5 L/min	+24% DX 6.05
Pressure declared	3,481 psi · 240 bar	1,740 psi · 120 bar	+100% DX 6.05
Three-point lift at ends declared	11,464 lb · 5,200 kg	6,349 lb · 2,880 kg	+81% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	6,856 lb · 3,110 kg	+46% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	94.9 in · 2,410 mm	+11% DX 6.05
Length declared	175.7 in · 4,464 mm	144.5 in · 3,670 mm	+22% DX 6.05
Width declared	87.0 in · 2,210 mm	81.1 in · 2,060 mm	+7% DX 6.05
Height declared	106.7 in · 2,710 mm	102.2 in · 2,595 mm	—
Ground clearance declared	17.9 in · 455 mm	20.5 in · 520 mm	+14% R 874-90 (DT)
Turning radius, braked declared	16.0 ft · 4.87 m	9.6 ft · 2.94 m	+66% DX 6.05
Fuel tank declared	137.4 qt · 130 L	116.2 qt · 110.0 L	+18% DX 6.05

Source

Source