Deutz-Fahr DX 6.05 vs Lamborghini 874-90 Turbo DT

14 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 874-90 Turbo DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Lamborghini 874-90 Turbo DT, field by field
Field	DX 6.05	874-90 Turbo DT	Gap
Engine
Engine power, claimed claimed	97 hp	86.8 hp	+11% DX 6.05
Engine declared	KHD F6L 912	SAME 1000.4 WT	differs
Displacement declared	5.65 L	4.00 L	+41% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	225 lb·ft · 305 N·m	+18% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Pedal-operated dry Lamborghini single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	10.4 gpm · 39.5 L/min	+24% DX 6.05
Pressure declared	3,481 psi · 240 bar	1,740 psi · 120 bar	+100% DX 6.05
Three-point lift at ends declared	11,464 lb · 5,200 kg	6,349 lb · 2,880 kg	+81% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	6,614 lb · 3,000 kg	+51% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	95.1 in · 2,415 mm	+10% DX 6.05
Length declared	175.7 in · 4,464 mm	145.2 in · 3,687 mm	+21% DX 6.05
Width declared	87.0 in · 2,210 mm	73.6 in · 1,870 mm	+18% DX 6.05
Height declared	106.7 in · 2,710 mm	100.1 in · 2,543 mm	+7% DX 6.05
Ground clearance declared	17.9 in · 455 mm	20.5 in · 520 mm	+14% 874-90 Turbo DT
Turning radius, braked declared	16.0 ft · 4.87 m	—	—
Fuel tank declared	137.4 qt · 130 L	89.8 qt · 85.0 L	+53% DX 6.05

Source

Source