Deutz-Fahr DX 6.05 vs Ford 7600 (A)

13 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1975–1981

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 7600 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Ford 7600 (A), field by field
Field	DX 6.05	7600 (A)	Gap
Engine
Engine power, claimed claimed	97 hp	90.8 hp	+6% DX 6.05
Engine declared	KHD F6L 912	Ford 256 DF	differs
Displacement declared	5.65 L	—	—
Maximum torque declared	266 lb·ft · 360 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Pedal operated dry Borg & Beck single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	9.6 gpm · 36.4 L/min	+34% DX 6.05
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	5,952 lb · 2,700 kg	+93% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	6,109 lb · 2,771 kg	+63% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	87.5 in · 2,223 mm	+20% DX 6.05
Length declared	175.7 in · 4,464 mm	145.2 in · 3,689 mm	+21% DX 6.05
Width declared	87.0 in · 2,210 mm	80.7 in · 2,051 mm	+8% DX 6.05
Height declared	106.7 in · 2,710 mm	99.9 in · 2,537 mm	+7% DX 6.05
Ground clearance declared	17.9 in · 455 mm	15.7 in · 400 mm	+14% DX 6.05
Turning radius, braked declared	16.0 ft · 4.87 m	10.6 ft · 3.23 m	+51% DX 6.05
Fuel tank declared	137.4 qt · 130 L	79.8 qt · 75.5 L	+72% DX 6.05

Source

Source