Deutz-Fahr DX 6.05 vs Fiat TL 90 (DT)

15 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the TL 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Fiat TL 90 (DT), field by field
Field	DX 6.05	TL 90 (DT)	Gap
Engine
Engine power, claimed claimed	97 hp	83.9 hp	+15% DX 6.05
Engine declared	KHD F6L 912	New Holland-Iveco 8045.25	differs
Displacement declared	5.65 L	3.91 L	+45% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	215 lb·ft · 292 N·m	+23% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	15.9 gpm · 60.0 L/min	+23% TL 90 (DT)
Pressure declared	3,481 psi · 240 bar	2,103 psi · 145 bar	+66% DX 6.05
Three-point lift at ends declared	11,464 lb · 5,200 kg	7,385 lb · 3,350 kg	+55% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	9,315 lb · 4,225 kg	+7% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	13,228 lb · 6,000 kg	+13% DX 6.05
Wheelbase declared	105.0 in · 2,667 mm	92.2 in · 2,342 mm	+14% DX 6.05
Length declared	175.7 in · 4,464 mm	174.4 in · 4,430 mm	—
Width declared	87.0 in · 2,210 mm	79.1 in · 2,009 mm	+10% DX 6.05
Height declared	106.7 in · 2,710 mm	100.4 in · 2,550 mm	+6% DX 6.05
Ground clearance declared	17.9 in · 455 mm	17.3 in · 440 mm	—
Turning radius, braked declared	16.0 ft · 4.87 m	12.0 ft · 3.65 m	+33% DX 6.05
Fuel tank declared	137.4 qt · 130 L	121.5 qt · 115.0 L	+13% DX 6.05

Source

Source