9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoFiat F-100 DT1990–1996No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the F-100 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Fiat F-100 DT, field by field
Field	DX 6.05	F-100 DT	Gap
Engine
Engine power, claimed claimed	97 hp	96.7 hp	—
Engine declared	KHD F6L 912	FIAT-IVECO 8065.06.300 or 8065.05 A	differs
Displacement declared	5.65 L	—	—
Maximum torque declared	266 lb·ft · 360 N·m	241 lb·ft · 327 N·m	+10% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	pedal-operated hydraulic dry LUK single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	10,582 lb · 4,800 kg	+6% F-100 DT
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% F-100 DT
Wheelbase declared	105.0 in · 2,667 mm	106.0 in · 2,692 mm	—
Length declared	175.7 in · 4,464 mm	185.4 in · 4,710 mm	+6% F-100 DT
Width declared	87.0 in · 2,210 mm	83.1–106.3 in · 2,110–2,700 mm	differs
Height, over the cab declared	106.7 in · 2,710 mm	109.4 in · 2,780 mm	—
Ground clearance declared	17.9 in · 455 mm	19.9 in · 505 mm	+11% F-100 DT
Turning radius, braked declared	16.0 ft · 4.87 m	16.0 ft · 4.87 m	—
Fuel tank declared	137.4 qt · 130 L	232.5 qt · 220.0 L	+69% F-100 DT

Source

Source