Deutz-Fahr DX 4.50 A vs SAME Explorer 80 (DT)

8 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.50 A and the Explorer 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.50 A and SAME Explorer 80 (DT), field by field
Field	DX 4.50 A	Explorer 80 (DT)	Gap
Engine
Engine power, claimed claimed	81.0 hp	78.9 hp	—
Engine declared	KHD BF4L 913 T	SAME 1000.4 A 1	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	211 lb·ft · 286 N·m	193 lb·ft · 261 N·m	+10% DX 4.50 A
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.4 gpm · 47.0 L/min	10.7 gpm · 40.5 L/min	+16% DX 4.50 A
Pressure declared	3,481 psi · 240 bar	1,740 psi · 120 bar	+100% DX 4.50 A
Three-point lift at ends declared	7,937 lb · 3,600 kg	7,606 lb · 3,450 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	6,614 lb · 3,000 kg	+22% DX 4.50 A
Maximum permissible mass declared	12,125 lb · 5,500 kg	—	—
Wheelbase declared	91.9 in · 2,333 mm	95.1 in · 2,415 mm	—
Length declared	159.1 in · 4,040 mm	145.2 in · 3,687 mm	+10% DX 4.50 A
Width declared	90.7 in · 2,304 mm	73.6 in · 1,870 mm	+23% DX 4.50 A
Height declared	102.8 in · 2,610 mm	102.1 in · 2,593 mm	—
Ground clearance declared	20.9 in · 530 mm	20.5 in · 520 mm	—
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	—	105.7 qt · 100.0 L	—

Source

Source