10 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 4.101985–1988No measured PTO figureTractor twoFiat 70-66 (DT)1984–1991No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.10 and the 70-66 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.10 and Fiat 70-66 (DT), field by field
Field	DX 4.10	70-66 (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	FIAT-IVECO 8045.06.206 or 306	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	175 lb·ft · 237 N·m	165 lb·ft · 224 N·m	+6% DX 4.10
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.0 L/min	8.7 gpm · 32.8 L/min	+22% DX 4.10
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% DX 4.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	5,864 lb · 2,660 kg	+47% DX 4.10
Maximum permissible mass declared	—	10,141 lb · 4,600 kg	—
Wheelbase declared	94.5 in · 2,400 mm	90.7 in · 2,305 mm	—
Length declared	163.0 in · 4,140 mm	137.8 in · 3,500 mm	+18% DX 4.10
Width declared	90.6 in · 2,300 mm	75.2 in · 1,910 mm	+20% DX 4.10
Height, over the cab declared	103.0 in · 2,615 mm	98.6 in · 2,505 mm	—
Ground clearance declared	16.7 in · 425 mm	21.9 in · 555 mm	+31% 70-66 (DT)
Turning radius, braked declared	13.7 ft · 4.17 m	11.3 ft · 3.45 m	+21% DX 4.10
Fuel tank declared	132.1 qt · 125 L	77.1 qt · 73.0 L	+71% DX 4.10

Source

Source