11 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.80 AS1985–1990No measured PTO figureTractor twoMassey Ferguson MF 3055 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.80 AS and the MF 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.80 AS and Massey Ferguson MF 3055 (A), field by field
Field	DX 3.80 AS	MF 3055 (A)	Gap
Engine
Engine power, claimed claimed	74 hp	74 hp	—
Engine declared	KHD F4L 913	Perkins A 4.248	differs
Displacement declared	4.09 L	4.07 L	—
Maximum torque declared	192 lb·ft · 260 N·m	209 lb·ft · 283 N·m	+9% MF 3055 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.6 gpm · 40.0 L/min	13.2 gpm · 50.0 L/min	+25% MF 3055 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift, at the coupling points declared	5,291 lb · 2,400 kg	8,940 lb · 4,055 kg	+69% MF 3055 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,275 lb · 3,300 kg	8,598 lb · 3,900 kg	+18% MF 3055 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	93.3 in · 2,371 mm	+5% MF 3055 (A)
Length declared	148.8 in · 3,780 mm	160.2 in · 4,070 mm	+8% MF 3055 (A)
Width declared	74.4 in · 1,890 mm	80.7 in · 2,049 mm	+8% MF 3055 (A)
Height, over the cab declared	92.9 in · 2,360 mm	105.1 in · 2,670 mm	+13% MF 3055 (A)
Ground clearance declared	13.4 in · 340 mm	14.6 in · 370 mm	+9% MF 3055 (A)
Fuel tank declared	100.4 qt · 95 L	156.4 qt · 148.0 L	+56% MF 3055 (A)

Source

Source