Deutz-Fahr DX 3.80 AS vs Lamborghini R-475 (DT)

9 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1971–1973

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.80 AS and the R-475 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.80 AS and Lamborghini R-475 (DT), field by field
Field	DX 3.80 AS	R-475 (DT)	Gap
Engine
Engine power, claimed claimed	74 hp	73.0 hp	—
Engine declared	KHD F4L 913	LAMBORGHINI FL-1104	differs
Displacement declared	4.09 L	4.16 L	—
Maximum torque declared	192 lb·ft · 260 N·m	190 lb·ft · 258 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% DX 3.80 AS
Clutch declared	Independent dry double clutch	Pedal operated dry Walterscheid double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.6 gpm · 40.0 L/min	6.4 gpm · 24.2 L/min	+65% DX 3.80 AS
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,027 lb · 2,734 kg	+14% R-475 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,275 lb · 3,300 kg	6,045 lb · 2,742 kg	+20% DX 3.80 AS
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	89.0 in · 2,260 mm	—
Length declared	148.8 in · 3,780 mm	149.2 in · 3,790 mm	—
Width declared	74.4 in · 1,890 mm	66.1 in · 1,680 mm	+13% DX 3.80 AS
Height declared	92.9 in · 2,360 mm	63.0 in · 1,600 mm	+48% DX 3.80 AS
Ground clearance declared	13.4 in · 340 mm	—	—
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	100.4 qt · 95 L	68.7 qt · 65.0 L	+46% DX 3.80 AS

Source

Source