Deutz-Fahr DX 3.75 A vs Renault 85-12 LS

11 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1985–1989

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.75 A and the 85-12 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.75 A and Renault 85-12 LS, field by field
Field	DX 3.75 A	85-12 LS	Gap
Engine
Engine power, claimed claimed	76.6 hp	77.0 hp	—
Engine declared	KHD F4L 913	MWM D 226-4	differs
Displacement declared	4.09 L	4.15 L	—
Maximum torque declared	183 lb·ft · 248 N·m	190 lb·ft · 258 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry LuK double clutch type 310/310	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.6 gpm · 40.0 L/min	11.0 gpm · 41.5 L/min	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	7,275 lb · 3,300 kg	8,433 lb · 3,825 kg	+16% 85-12 LS
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,077 lb · 3,210 kg	6,625 lb · 3,005 kg	+7% DX 3.75 A
Maximum permissible mass declared	11,023 lb · 5,000 kg	12,456 lb · 5,650 kg	+13% 85-12 LS
Wheelbase declared	88.6 in · 2,250 mm	93.3 in · 2,370 mm	+5% 85-12 LS
Length declared	141.7 in · 3,600 mm	152.4 in · 3,870 mm	+8% 85-12 LS
Width declared	84.2 in · 2,138 mm	76.0 in · 1,930 mm	+11% DX 3.75 A
Height declared	92.2 in · 2,341 mm	99.2 in · 2,520 mm	+8% 85-12 LS
Ground clearance declared	16.1 in · 408 mm	19.3 in · 490 mm	+20% 85-12 LS
Turning radius, braked declared	12.8 ft · 3.90 m	13.3 ft · 4.05 m	—
Fuel tank declared	91.9 qt · 87 L	87.7 qt · 83.0 L	—

Source

Source