9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.701984–1989No measured PTO figureTractor twoFiat 70-66 (DT)1984–1991No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.70 and the 70-66 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.70 and Fiat 70-66 (DT), field by field
Field	DX 3.70	70-66 (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	FIAT-IVECO 8045.06.206 or 306	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	173 lb·ft · 234 N·m	165 lb·ft · 224 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	—	8.7 gpm · 32.8 L/min	—
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% DX 3.70
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	5,864 lb · 2,660 kg	+18% DX 3.70
Maximum permissible mass declared	11,023 lb · 5,000 kg	10,141 lb · 4,600 kg	+9% DX 3.70
Wheelbase declared	91.6 in · 2,327 mm	90.7 in · 2,305 mm	—
Length declared	153.9 in · 3,910 mm	137.8 in · 3,500 mm	+12% DX 3.70
Width declared	84.2 in · 2,138 mm	75.2 in · 1,910 mm	+12% DX 3.70
Height, over the cab declared	97.2 in · 2,470 mm	98.6 in · 2,505 mm	—
Ground clearance declared	18.0 in · 457 mm	21.9 in · 555 mm	+21% 70-66 (DT)
Turning radius, braked declared	—	11.3 ft · 3.45 m	—
Fuel tank declared	100.4 qt · 95 L	77.1 qt · 73.0 L	+30% DX 3.70

Source

Source