Deutz-Fahr DX 3.65 vs UTB U-703 DT

7 material differences · fewer than 12

Tractor one

1987–1996

No measured PTO figure

Tractor two

1988–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the U-703 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 10 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and UTB U-703 DT, field by field
Field	DX 3.65	U-703 DT	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	UTB D-2404.000	differs
Displacement declared	3.77 L	3.76 L	—
Maximum torque declared	180 lb·ft · 244 N·m	175 lb·ft · 237 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% DX 3.65
Clutch declared	independent dry double clutch	Dry U.T.B. double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	11.2 gpm · 42.5 L/min	—
Pressure declared	3,481 psi · 240 bar	2,031 psi · 140 bar	+71% DX 3.65
Three-point lift at ends declared	7,275 lb · 3,300 kg	7,575 lb · 3,436 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	7,198 lb · 3,265 kg	—
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	87.2 in · 2,215 mm	—
Length declared	150.4 in · 3,820 mm	148.4 in · 3,770 mm	—
Width declared	85.9 in · 2,183 mm	76.3 in · 1,939 mm	+13% DX 3.65
Height declared	101.6 in · 2,580 mm	98.4 in · 2,500 mm	—
Ground clearance declared	16.1 in · 408 mm	9.7 in · 246 mm	+66% DX 3.65
Turning radius, braked declared	15.1 ft · 4.60 m	—	—
Fuel tank declared	76.1 qt · 72 L	65.5 qt · 62.0 L	+16% DX 3.65

Source

Source