Deutz-Fahr DX 3.65 vs Steyr 8080 (a)

8 material differences · fewer than 12

Tractor one

1987–1996

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the 8080 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and Steyr 8080 (a), field by field
Field	DX 3.65	8080 (a)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	Steyr WD-411.86 or WD-411.85	differs
Displacement declared	3.77 L	3.46 L	+9% DX 3.65
Maximum torque declared	180 lb·ft · 244 N·m	189 lb·ft · 256 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	15.5–24.9 mph · 25–40 km/h	differs
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	7,275 lb · 3,300 kg	5,732 lb · 2,600 kg	+27% DX 3.65
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	6,191 lb · 2,808 kg	+21% DX 3.65
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	86.4 in · 2,195 mm	—
Length declared	150.4 in · 3,820 mm	148.4 in · 3,770 mm	—
Width declared	85.9 in · 2,183 mm	74.1 in · 1,883 mm	+16% DX 3.65
Height declared	101.6 in · 2,580 mm	101.2 in · 2,570 mm	—
Ground clearance declared	16.1 in · 408 mm	15.7 in · 400 mm	—
Turning radius, braked declared	15.1 ft · 4.60 m	11.5 ft · 3.50 m	+31% DX 3.65
Fuel tank declared	76.1 qt · 72 L	101.4 qt · 96.0 L	+33% 8080 (a)

Source

Source