Deutz-Fahr DX 3.65 vs Schlüter Compact 750 V4

9 material differences · fewer than 12

Tractor one

1987–1996

No measured PTO figure

Tractor two

1984

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the Compact 750 V4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and Schlüter Compact 750 V4, field by field
Field	DX 3.65	Compact 750 V4	Gap
Engine
Engine power, claimed claimed	69.1 hp	68.7 hp	—
Engine declared	KHD F4L 912	MAN D 0224 ME 51	differs
Displacement declared	3.77 L	3.79 L	—
Maximum torque declared	180 lb·ft · 244 N·m	195 lb·ft · 265 N·m	+9% Compact 750 V4
Transmission
Top speed declared	24.9 mph · 40 km/h	23.8 mph · 38.3 km/h	—
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	7,275 lb · 3,300 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	8,598 lb · 3,900 kg	+15% Compact 750 V4
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	94.5 in · 2,400 mm	+7% Compact 750 V4
Length declared	150.4 in · 3,820 mm	164.2 in · 4,170 mm	+9% Compact 750 V4
Width declared	85.9 in · 2,183 mm	77.6 in · 1,970 mm	+11% DX 3.65
Height declared	101.6 in · 2,580 mm	99.8 in · 2,535 mm	—
Ground clearance declared	16.1 in · 408 mm	18.5 in · 470 mm	+15% Compact 750 V4
Turning radius, braked declared	15.1 ft · 4.60 m	13.1 ft · 4.00 m	+15% DX 3.65
Fuel tank declared	76.1 qt · 72 L	—	—

Source

Source