Deutz-Fahr DX 3.65 vs International Harvester Hydro 70

12 material differences

Tractor one

1987–1996

No measured PTO figure

Tractor two

1973–1976

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the Hydro 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and International Harvester Hydro 70, field by field
Field	DX 3.65	Hydro 70	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	INTERNATIONAL HARVESTER C-291	differs
Displacement declared	3.77 L	—	—
Maximum torque declared	180 lb·ft · 244 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	21.1 mph · 34 km/h	+18% DX 3.65
Clutch declared	independent dry double clutch	Pedal operated ceramic clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	12.0 gpm · 45.5 L/min	+7% Hydro 70
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	7,275 lb · 3,300 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	8,439 lb · 3,828 kg	+13% Hydro 70
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	103.0 in · 2,616 mm	+16% Hydro 70
Length declared	150.4 in · 3,820 mm	161.0 in · 4,089 mm	+7% Hydro 70
Width declared	85.9 in · 2,183 mm	87.0 in · 2,210 mm	—
Height declared	101.6 in · 2,580 mm	77.0 in · 1,956 mm	+32% DX 3.65
Ground clearance declared	16.1 in · 408 mm	21.0 in · 533 mm	+31% Hydro 70
Turning radius, braked declared	15.1 ft · 4.60 m	12.0 ft · 3.66 m	+26% DX 3.65
Fuel tank declared	76.1 qt · 72 L	123.9 qt · 117.3 L	+63% Hydro 70

Source

Source