13 material differences

Tractor oneDeutz-Fahr DX 3.651987–1996No measured PTO figureTractor twoHürlimann H-272 TA1989–1996No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the H-272 TA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and Hürlimann H-272 TA, field by field
Field	DX 3.65	H-272 TA	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	Hürlimann H-1000.3 AT	differs
Displacement declared	3.77 L	3.00 L	+26% DX 3.65
Maximum torque declared	180 lb·ft · 244 N·m	174 lb·ft · 236 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	independent dry double clutch	Dry SLH double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	7.0 gpm · 26.4 L/min	+61% DX 3.65
Pressure declared	3,481 psi · 240 bar	1,305 psi · 90 bar	+167% DX 3.65
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	6,283 lb · 2,850 kg	+19% DX 3.65
Maximum permissible mass declared	11,023 lb · 5,000 kg	10,141 lb · 4,600 kg	+9% DX 3.65
Wheelbase declared	88.6 in · 2,250 mm	86.4 in · 2,194 mm	—
Length declared	150.4 in · 3,820 mm	152.0 in · 3,860 mm	—
Width declared	85.9 in · 2,183 mm	76.0 in · 1,930 mm	+13% DX 3.65
Height, over the cab declared	101.6 in · 2,580 mm	93.5 in · 2,375 mm	+9% DX 3.65
Ground clearance declared	16.1 in · 408 mm	14.4 in · 365 mm	+12% DX 3.65
Turning radius, braked declared	15.1 ft · 4.60 m	11.2 ft · 3.42 m	+35% DX 3.65
Fuel tank declared	76.1 qt · 72 L	82.4 qt · 78.0 L	+8% H-272 TA

Source

Source