Deutz-Fahr DX 3.60 vs Renault Ceres 75 X (A)

11 material differences · fewer than 12

Tractor one

1986–1996

No measured PTO figure

Tractor two

1994–1998

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.60 and the Ceres 75 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.60 and Renault Ceres 75 X (A), field by field
Field	DX 3.60	Ceres 75 X (A)	Gap
Engine
Engine power, claimed claimed	63.8 hp	64.1 hp	—
Engine declared	KHD F4L 912	JOHN DEERE 4039 DRT 35	differs
Displacement declared	3.77 L	3.92 L	—
Maximum torque declared	162 lb·ft · 220 N·m	169 lb·ft · 229 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.8 gpm · 41.0 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,327 lb · 2,870 kg	+20% Ceres 75 X (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,338 lb · 2,875 kg	6,967 lb · 3,160 kg	+10% Ceres 75 X (A)
Maximum permissible mass declared	10,362 lb · 4,700 kg	11,684 lb · 5,300 kg	+13% Ceres 75 X (A)
Wheelbase declared	88.5 in · 2,249 mm	94.8–95.7 in · 2,407–2,430 mm	differs
Length declared	145.3 in · 3,690 mm	156.7 in · 3,979 mm	+8% Ceres 75 X (A)
Width declared	84.2 in · 2,138 mm	73.2 in · 1,860 mm	+15% DX 3.60
Height declared	92.9 in · 2,360 mm	99.2 in · 2,520 mm	+7% Ceres 75 X (A)
Ground clearance declared	18.0 in · 457 mm	16.9 in · 430 mm	+6% DX 3.60
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	76.1 qt · 72 L	121.5 qt · 115.0 L	+60% Ceres 75 X (A)

Source

Source