Deutz-Fahr DX 3.60 vs International Harvester 684

10 material differences · fewer than 12

Tractor one

1986–1996

No measured PTO figure

Tractor two

1977–1981

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.60 and the 684 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.60 and International Harvester 684, field by field
Field	DX 3.60	684	Gap
Engine
Engine power, claimed claimed	63.8 hp	68.0 hp	+7% 684
Engine declared	KHD F4L 912	INTERNATIONAL-HARVESTER D-239	differs
Displacement declared	3.77 L	3.91 L	—
Maximum torque declared	162 lb·ft · 220 N·m	162 lb·ft · 220 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.8 gpm · 41.0 L/min	9.9 gpm · 37.5 L/min	+9% DX 3.60
Pressure declared	3,481 psi · 240 bar	2,698 psi · 186 bar	+29% DX 3.60
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,409 lb · 2,000 kg	+20% DX 3.60
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,338 lb · 2,875 kg	5,181 lb · 2,350 kg	+22% DX 3.60
Maximum permissible mass declared	10,362 lb · 4,700 kg	—	—
Wheelbase declared	88.5 in · 2,249 mm	88.0 in · 2,235 mm	—
Length declared	145.3 in · 3,690 mm	146.5 in · 3,720 mm	—
Width declared	84.2 in · 2,138 mm	70.1 in · 1,780 mm	+20% DX 3.60
Height declared	92.9 in · 2,360 mm	99.6 in · 2,530 mm	+7% 684
Ground clearance declared	18.0 in · 457 mm	14.6 in · 370 mm	+24% DX 3.60
Turning radius, braked declared	—	10.9 ft · 3.33 m	—
Fuel tank declared	76.1 qt · 72 L	81.4 qt · 77.0 L	+7% 684

Source

Source