Deutz-Fahr DX 3.60 vs International Harvester 674
11 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1986–1996; 1973–1975). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 3.60 | 674 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.8 hp | 64.1 hp | — |
| Engine declared | KHD F4L 912 | INTERNATIONAL-HARVESTER D-239 | differs |
| Displacement declared | 3.77 L | 3.91 L | — |
| Maximum torque declared | 162 lb·ft · 220 N·m | 153 lb·ft · 207 N·m | +6% DX 3.60 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent dry double clutch | Pedal-operated dry LAYCOCK single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 10.8 gpm · 41.0 L/min | 11.1–12.6 gpm · 42.1–47.7 L/min | differs |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | 5,291 lb · 2,400 kg | 4,211 lb · 1,910 kg | +26% DX 3.60 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,338 lb · 2,875 kg | 5,106 lb · 2,316 kg | +24% DX 3.60 |
| Maximum permissible mass declared | 10,362 lb · 4,700 kg | — | — |
| Wheelbase declared | 88.5 in · 2,249 mm | 84.5 in · 2,146 mm | — |
| Length declared | 145.3 in · 3,690 mm | 140.6 in · 3,570 mm | — |
| Width declared | 84.2 in · 2,138 mm | 68.9 in · 1,750 mm | +22% DX 3.60 |
| Height declared | 92.9 in · 2,360 mm | 86.2 in · 2,190 mm | +8% DX 3.60 |
| Ground clearance declared | 18.0 in · 457 mm | 14.4 in · 365 mm | +25% DX 3.60 |
| Turning radius, braked declared | — | 10.9 ft · 3.31 m | — |
| Fuel tank declared | 76.1 qt · 72 L | 81.2 qt · 76.8 L | +7% 674 |
Deutz-Fahr DX 3.60 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.60”
- Source: Traktorenlexikon, “Deutz D 6006”
International Harvester 674 sources
Source
- Source: Traktorenlexikon, “IHC 674”
- Source: Traktorenlexikon, “IHC 574”
- Source: Traktorenlexikon, “IHC 674 (USA)”