Deutz-Fahr DX 3.50 vs ZETOR 6911/6945

10 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1977–1980

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.50 and the 6911/6945 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.50 and ZETOR 6911/6945, field by field
Field	DX 3.50	6911/6945	Gap
Engine
Engine power, claimed claimed	59 hp	64.1 hp	+9% 6911/6945
Engine declared	KHD F3L 913	ZBROJORKA Z-6901	differs
Displacement declared	3.06 L	3.59 L	+17% 6911/6945
Maximum torque declared	144 lb·ft · 195 N·m	146 lb·ft · 198 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.0 gpm · 38.0 L/min	6.4 gpm · 24.3 L/min	+56% DX 3.50
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	7,738 lb · 3,510 kg	+46% 6911/6945
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,019–6,878 lb · 2,730–3,120 kg	6,327 lb · 2,870 kg	differs
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	88.5 in · 2,247 mm	+12% 6911/6945
Length declared	142.9 in · 3,630 mm	143.9 in · 3,655 mm	—
Width declared	84.2 in · 2,138 mm	72.4 in · 1,840 mm	+16% DX 3.50
Height declared	92.5–103.1 in · 2,350–2,620 mm	97.4 in · 2,475 mm	differs
Ground clearance declared	18.0 in · 457 mm	18.9 in · 480 mm	—
Turning radius, braked declared	11.8 ft · 3.60 m	11.8 ft · 3.59 m	—
Fuel tank declared	—	80.3 qt · 76.0 L	—

Source

Source