Deutz-Fahr DX 3.50 vs Massey Ferguson MF 365 (A)

11 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1988–1997

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.50 and the MF 365 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.50 and Massey Ferguson MF 365 (A), field by field
Field	DX 3.50	MF 365 (A)	Gap
Engine
Engine power, claimed claimed	59 hp	64 hp	+9% MF 365 (A)
Engine declared	KHD F3L 913	Perkins A 4.236	differs
Displacement declared	3.06 L	3.87 L	+26% MF 365 (A)
Maximum torque declared	144 lb·ft · 195 N·m	181 lb·ft · 246 N·m	+26% MF 365 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry and air-cooled double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.0 gpm · 38.0 L/min	—	—
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,373 lb · 2,891 kg	+20% MF 365 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,019–6,878 lb · 2,730–3,120 kg	5,712 lb · 2,591 kg	differs
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	90.0 in · 2,286 mm	+14% MF 365 (A)
Length declared	142.9 in · 3,630 mm	149.6 in · 3,800 mm	—
Width declared	84.2 in · 2,138 mm	72.8 in · 1,850 mm	+16% DX 3.50
Height declared	92.5–103.1 in · 2,350–2,620 mm	96.1 in · 2,440 mm	differs
Ground clearance declared	18.0 in · 457 mm	15.7 in · 400 mm	+14% DX 3.50
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	—	114.1 qt · 108.0 L	—

Source

Source