Deutz-Fahr DX 3.30 vs SOMECA 600 (TD)

13 material differences

Tractor one

1984–1996

No measured PTO figure

Tractor two

1971–1973

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.30 and the 600 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.30 and SOMECA 600 (TD), field by field
Field	DX 3.30	600 (TD)	Gap
Engine
Engine power, claimed claimed	54 hp	59.1 hp	+10% 600 (TD)
Engine declared	KHD F3L 912	FIAT-IVECO 8045.02.200	differs
Displacement declared	2.83 L	3.46 L	+22% 600 (TD)
Maximum torque declared	119 lb·ft · 162 N·m	147 lb·ft · 199 N·m	+23% 600 (TD)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	Pedal operated two stage dry Ferodo double clutch	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	5.8 gpm · 21.8 L/min	+74% DX 3.30
Pressure declared	3,481 psi · 240 bar	2,843 psi · 196 bar	+22% DX 3.30
Three-point lift at ends declared	4,699 lb · 2,131 kg	3,395 lb · 1,540 kg	+38% DX 3.30
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	4,663 lb · 2,115 kg	+29% DX 3.30
Wheelbase declared	79.2 in · 2,012 mm	81.5 in · 2,070 mm	—
Length declared	137.4 in · 3,490 mm	135.0 in · 3,430 mm	—
Width declared	72.8 in · 1,848 mm	70.9 in · 1,800 mm	—
Height declared	91.7 in · 2,330 mm	71.3 in · 1,810 mm	+29% DX 3.30
Ground clearance declared	16.1 in · 410 mm	17.6 in · 447 mm	+9% 600 (TD)
Turning radius, braked declared	—	11.2 ft · 3.42 m	—
Fuel tank declared	87.7 qt · 83 L	57.1 qt · 54.0 L	+54% DX 3.30

Source

Source