Deutz-Fahr DX 3.10 vs VALMET 4100

10 material differences · fewer than 12

Tractor one

1984–1990

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.10 and the 4100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.10 and VALMET 4100, field by field
Field	DX 3.10	4100	Gap
Engine
Engine power, claimed claimed	46 hp	52 hp	+15% 4100
Engine declared	KHD F3L 912	VALMET 320 D	differs
Displacement declared	2.83 L	3.30 L	+17% 4100
Maximum torque declared	123 lb·ft · 167 N·m	144 lb·ft · 195 N·m	+17% 4100
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.1 gpm · 34.4 L/min	10.3 gpm · 39.0 L/min	+13% 4100
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% DX 3.10
Three-point lift at ends declared	4,189 lb · 1,900 kg	6,294 lb · 2,855 kg	+50% 4100
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	5,864 lb · 2,660 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	83.1 in · 2,112 mm	—
Length declared	137.4 in · 3,490 mm	149.2 in · 3,790 mm	+9% 4100
Width declared	70.4 in · 1,788 mm	68.0 in · 1,728 mm	—
Height declared	91.1 in · 2,315 mm	92.5 in · 2,350 mm	—
Ground clearance declared	16.1 in · 410 mm	16.7 in · 425 mm	—
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	87.7 qt · 83 L	100.4 qt · 95.0 L	+14% 4100

Source

Source