8 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.101984–1990No measured PTO figureTractor twoRenault 461 S1980–1987No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.10 and the 461 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.10 and Renault 461 S, field by field
Field	DX 3.10	461 S	Gap
Engine
Engine power, claimed claimed	46 hp	45.5 hp	—
Engine declared	KHD F3L 912	MWM D 327-3	differs
Displacement declared	2.83 L	2.83 L	—
Maximum torque declared	123 lb·ft · 167 N·m	129 lb·ft · 175 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	Dry VERTO double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.1 gpm · 34.4 L/min	6.5 gpm · 24.5 L/min	+40% DX 3.10
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift, at the coupling points declared	4,189 lb · 1,900 kg	5,512 lb · 2,500 kg	+32% 461 S
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	4,484 lb · 2,034 kg	+25% DX 3.10
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	83.0 in · 2,107 mm	—
Length declared	137.4 in · 3,490 mm	135.8 in · 3,449 mm	—
Width declared	70.4 in · 1,788 mm	66.5 in · 1,690 mm	+6% DX 3.10
Height, over the cab declared	91.1 in · 2,315 mm	92.9 in · 2,360 mm	—
Ground clearance declared	16.1 in · 410 mm	—	—
Turning radius, braked declared	—	11.0 ft · 3.35 m	—
Fuel tank declared	87.7 qt · 83 L	50.7 qt · 48.0 L	+73% DX 3.10

Source

Source