4 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 2501982–1983No measured PTO figureTractor twoFendt Favorit 622 LS1979–1982No measured PTO figure
Which should you choose?
Read our verdict on the DX 250 and the Favorit 622 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | DX 250 | Favorit 622 LS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 217 hp | 208 hp | — |
| Engine declared | KHD BF6L 413 FR | — | — |
| Displacement declared | 9.57 L | — | — |
| Maximum torque declared | 597 lb·ft · 810 N·m | 611 lb·ft · 828 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 24.2–24.5 mph · 39.0–39.5 km/h | differs |
| Clutch declared | — | Driving clutch, separate PTO clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 21.4 gpm · 81 L/min | — | — |
| Rear PTO speeds declared | 923 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,393 lb · 9,250 kg | 21,109 lb · 9,575 kg | — |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 25,441 lb · 11,540 kg | — |
| Wheelbase declared | 118.6 in · 3,012 mm | 108.3 in · 2,750 mm | +10% DX 250 |
| Length declared | 213.7 in · 5,427 mm | 220.5 in · 5,600 mm | — |
| Width declared | 98.4 in · 2,500 mm | 96.5 in · 2,450 mm | — |
| Ground clearance declared | 20.7 in · 525 mm | 19.7 in · 500 mm | — |
| Turning radius, braked declared | — | 19.4 ft · 5.90 m | — |
| Fuel tank declared | 422.7 qt · 400 L | 369.8 qt · 350 L | +14% DX 250 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 250 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 250”
- Source: Traktorenlexikon, “Deutz-Fahr DX 230”
Fendt Favorit 622 LS sources
- Source: Traktorenlexikon, “Fendt Favorit 622 LS/LSA”