11 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 2301980–1982No measured PTO figureTractor twoMassey Ferguson MF 8160 A1995–1999No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (38%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1980–1982; 1995–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | DX 230 | MF 8160 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 196.3 hp | 197.4 hp | — |
| Engine declared | KHD BF6L 413 FR | VALMET 634 DS | differs |
| Displacement declared | 9.57 L | 7.37 L | +30% DX 230 |
| Maximum torque declared | 553 lb·ft · 750 N·m | 586 lb·ft · 795 N·m | +6% MF 8160 A |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry VALEO double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 21.4 gpm · 81 L/min | 14.1 gpm · 53.3 L/min | +52% DX 230 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 19,493 lb · 8,842 kg | 12,434 lb · 5,640 kg | +57% DX 230 |
| Rear PTO speeds declared | 923 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,393 lb · 9,250 kg | 14,815 lb · 6,720 kg | +38% DX 230 |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 19,842 lb · 9,000 kg | +33% DX 230 |
| Wheelbase declared | 118.6 in · 3,012 mm | 115.7 in · 2,940 mm | — |
| Length declared | 213.7 in · 5,427 mm | 220.9 in · 5,610 mm | — |
| Width declared | 98.4 in · 2,500 mm | 97.6 in · 2,480 mm | — |
| Ground clearance declared | 20.7 in · 525 mm | 18.2 in · 463 mm | +13% DX 230 |
| Fuel tank declared | 422.7 qt · 400 L | 285.3 qt · 270.0 L | +48% DX 230 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 230 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 230”
Massey Ferguson MF 8160 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 8160”