13 material differences

Tractor oneDeutz-Fahr DX 1601978–1984No measured PTO figureTractor twoURSUS 1.6041978–1984No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 1.604 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and URSUS 1.604, field by field
Field	DX 160	1.604	Gap
Engine
Engine power, claimed claimed	148.0 hp	147.9 hp	—
Engine declared	KHD BF6L 913	T.S.-MARTIN Z-8602	differs
Displacement declared	6.13 L	6.84 L	+12% 1.604
Maximum torque declared	393 lb·ft · 533 N·m	370 lb·ft · 502 N·m	+6% DX 160
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	Pedal operated dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.4 gpm · 58.4 L/min	—	—
Pressure declared	3,771 psi · 260 bar	2,756–2,901 psi · 190–200 bar	differs
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	10,825 lb · 4,910 kg	+10% DX 160
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	103.6 in · 2,631 mm	106.1 in · 2,695 mm	—
Length declared	185.4 in · 4,710 mm	175.6 in · 4,460 mm	+6% DX 160
Width declared	93.3 in · 2,370 mm	84.8 in · 2,155 mm	+10% DX 160
Height, over the cab declared	107.5 in · 2,730 mm	100.4 in · 2,550 mm	+7% DX 160
Ground clearance declared	23.8 in · 605 mm	17.3 in · 440 mm	+38% DX 160
Turning radius, braked declared	14.7 ft · 4.47 m	16.5 ft · 5.03 m	+13% 1.604
Fuel tank declared	158.5 qt · 150 L	206.1 qt · 195.0 L	+30% 1.604

Source

Source