Deutz-Fahr DX 120 vs VALMET 8050
13 material differences
Which should you choose?
Read our verdict on the DX 120 and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DX 120 | 8050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.0 hp | 108.5 hp | — |
| Engine declared | KHD F6L 913 | VALMET 620 DSR or 620 DSRE | differs |
| Displacement declared | 6.13 L | 6.59 L | +8% 8050 |
| Maximum torque declared | 286 lb·ft · 388 N·m | 340 lb·ft · 461 N·m | +19% 8050 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Clutch declared | Independent dry double clutch | Pedal-operated dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.7 gpm · 55.7 L/min | 18.8 gpm · 71.0 L/min | +27% 8050 |
| Pressure declared | 3,046–3,771 psi · 210–260 bar | — | — |
| Three-point lift at ends declared | 11,464 lb · 5,200 kg | 14,110 lb · 6,400 kg | +23% 8050 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,789 lb · 4,440 kg | 10,450 lb · 4,740 kg | +7% 8050 |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 105.8 in · 2,688 mm | 100.7 in · 2,558 mm | — |
| Length declared | 176.8 in · 4,490 mm | 187.3 in · 4,757 mm | +6% 8050 |
| Width declared | 90.7 in · 2,304 mm | 84.8 in · 2,155 mm | +7% DX 120 |
| Height declared | 109.4 in · 2,780 mm | 108.3 in · 2,750 mm | — |
| Ground clearance declared | 23.2 in · 590 mm | 18.7 in · 475 mm | +24% DX 120 |
| Fuel tank declared | 126.8 qt · 120 L | 174.4 qt · 165.0 L | +38% 8050 |
Deutz-Fahr DX 120 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 120”
VALMET 8050 sources
Source
- Source: Traktorenlexikon, “Valmet Mega-8050”