Deutz-Fahr D 6907 A ( C ) vs VALMET 605/605-4
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 6907 A ( C ) and the 605/605-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 6907 A ( C ) | 605/605-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68 hp | 71.1 hp | — |
| Engine declared | KHD F4L 912 | VALMET TD 33 DS 6 | differs |
| Displacement declared | 3.77 L | 3.30 L | +14% D 6907 A ( C ) |
| Maximum torque declared | 175 lb·ft · 237 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal operated dry LuK single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 13.9 gpm · 52.7 L/min | — |
| Three-point lift at ends declared | 5,291 lb · 2,400 kg | 8,699 lb · 3,946 kg | +64% 605/605-4 |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,393 lb · 2,900 kg | 7,584 lb · 3,440 kg | +19% 605/605-4 |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 85.8 in · 2,180 mm | 93.2 in · 2,368 mm | +9% 605/605-4 |
| Length declared | 144.3 in · 3,664 mm | 168.9 in · 4,290 mm | +17% 605/605-4 |
| Width declared | 81.1 in · 2,060 mm | 80.3 in · 2,040 mm | — |
| Height declared | 96.6 in · 2,454 mm | 105.1 in · 2,670 mm | +9% 605/605-4 |
| Ground clearance declared | 15.0 in · 380 mm | 17.1 in · 435 mm | +14% 605/605-4 |
| Fuel tank declared | 95.1 qt · 90 L | 190.2 qt · 180.0 L | +100% 605/605-4 |
Deutz-Fahr D 6907 A ( C ) sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr D 6907”
- Source: Traktorenlexikon, “Deutz D 6006”
VALMET 605/605-4 sources
Source
- Source: Traktorenlexikon, “Valmet 605”