Deutz-Fahr D 6507 (C) or New Holland 4835 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland 4835 (A): hydraulic flow, three-point lift and maximum permissible mass. It is also ahead on forward gears and PTO speeds.
- The New Holland 4835 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The New Holland 4835 (A) suits loader and hydraulic implement work better on this data: 40% (12.7 L/min / 3.4 gpm) more hydraulic flow and 21% (500 kg / 1,102 lb) more three-point lift.
- The New Holland 4835 (A) suits road haulage better on this data: 30% (1,200 kg / 2,646 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | D 6507 (C) | 4835 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 41.7 kW (55.9 hp)Traktorenlexikon, “Deutz-Fahr D 6507” | 41.8 kW (56.1 hp)Traktorenlexikon, “New Holland 4835” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the D 6507 (C) and the 4835 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the D 6507 (C) and the 4835 (A). |
| Which pumps more oil for implements? | 31.8 L/min (8.4 gpm)Traktorenlexikon, “Deutz-Fahr D 6507” | 44.5 L/min (11.8 gpm)Traktorenlexikon, “New Holland 4835” | AheadThe New Holland 4835 (A) has 40% more hydraulic flow (12.7 L/min / 3.4 gpm) than the Deutz-Fahr D 6507 (C) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Fahr D 6507” | 2,900 kg (6,393 lb)Traktorenlexikon, “New Holland 4835” | AheadThe New Holland 4835 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6507 (C) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,530 kg (5,578 lb)Traktorenlexikon, “Deutz-Fahr D 6507” | 3,910 kg (8,620 lb)Traktorenlexikon, “New Holland 4835” | Ahead (a fact, not an advantage)The New Holland 4835 (A) is 55% heavier (1,380 kg / 3,042 lb) than the Deutz-Fahr D 6507 (C) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Deutz-Fahr D 6507” | 5,200 kg (11,464 lb)Traktorenlexikon, “New Holland 4835” | AheadThe New Holland 4835 (A) has 30% higher maximum permissible mass (1,200 kg / 2,646 lb) than the Deutz-Fahr D 6507 (C) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Deutz-Fahr D 6507” | 12 to 24Traktorenlexikon, “New Holland 4835” | AheadThe New Holland 4835 (A) has 50% more forward gears (4 gears) than the Deutz-Fahr D 6507 (C) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | YesTraktorenlexikon, “New Holland 4835” | No figureNo call on a creeper range: not stated for the D 6507 (C). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr D 6507” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland 4835” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Deutz-Fahr D 6507” | 540/540E/1000 rpmTraktorenlexikon, “New Holland 4835” | AheadThe New Holland 4835 (A) offers 1000 rpm at the PTO, which the Deutz-Fahr D 6507 (C) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland 4835” | No figureNo call on PTO independence: not stated for the D 6507 (C). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Deutz-Fahr D 6507” | 2WD / 4WDTraktorenlexikon, “New Holland 4835” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1984 | 1996–1998 | Ahead (a fact, not an advantage)The New Holland 4835 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland 4835 (A) has 40% more hydraulic flow (12.7 L/min / 3.4 gpm) than the Deutz-Fahr D 6507 (C) (both pump flow, as stated by the source).
- The New Holland 4835 (A) has 21% more lift (500 kg / 1,102 lb) than the Deutz-Fahr D 6507 (C) (both lift at the hitch ends, as stated by the source).
- The New Holland 4835 (A) is 55% heavier (1,380 kg / 3,042 lb) than the Deutz-Fahr D 6507 (C) (both unladen weight, as stated by the source).
- The New Holland 4835 (A) has 30% higher maximum permissible mass (1,200 kg / 2,646 lb) than the Deutz-Fahr D 6507 (C) (both maximum permissible mass, as stated by the source).
- The New Holland 4835 (A) has 50% more forward gears (4 gears) than the Deutz-Fahr D 6507 (C) (both forward gears, as stated by the source).
- The New Holland 4835 (A) offers 1000 rpm at the PTO, which the Deutz-Fahr D 6507 (C) does not (as stated by the sources).
- The New Holland 4835 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources