Deutz-Fahr D 6507 (C) vs New Holland 4835 (A)

12 material differences

Tractor one

1982–1984

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the 4835 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and New Holland 4835 (A), field by field
Field	D 6507 (C)	4835 (A)	Gap
Engine
Engine power, claimed claimed	62 hp	64.1 hp	—
Engine declared	KHD F4L 912	Iveco 8045.06	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	174 lb·ft · 236 N·m	146 lb·ft · 198 N·m	+19% D 6507 (C)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	11.8 gpm · 44.5 L/min	+40% 4835 (A)
Pressure declared	—	2,103 psi · 145 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,393 lb · 2,900 kg	+21% 4835 (A)
Rear PTO speeds declared	540 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	8,620 lb · 3,910 kg	+55% 4835 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	11,464 lb · 5,200 kg	+30% 4835 (A)
Wheelbase declared	83.7 in · 2,125 mm	92.2 in · 2,342 mm	+10% 4835 (A)
Length declared	148.0 in · 3,760 mm	153.9 in · 3,910 mm	—
Width declared	81.1 in · 2,060 mm	83.5 in · 2,120 mm	—
Height declared	96.5 in · 2,450 mm	98.4 in · 2,500 mm	—
Ground clearance declared	19.3 in · 490 mm	18.9 in · 480 mm	—
Turning radius, braked declared	11.7 ft · 3.58 m	12.4 ft · 3.79 m	+6% 4835 (A)
Fuel tank declared	74.0 qt · 70 L	121.5 qt · 115.0 L	+64% 4835 (A)

Source

Source