Deutz-Fahr D 6507 (C) vs Hürlimann D-470 (A)

13 material differences

Tractor one

1982–1984

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the D-470 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and Hürlimann D-470 (A), field by field
Field	D 6507 (C)	D-470 (A)	Gap
Engine
Engine power, claimed claimed	62 hp	70.9 hp	+15% D-470 (A)
Engine declared	KHD F4L 912	Hürlimann H-1104 or H-1104/6	differs
Displacement declared	3.77 L	4.56 L	+21% D-470 (A)
Maximum torque declared	174 lb·ft · 236 N·m	195 lb·ft · 265 N·m	+12% D-470 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% D 6507 (C)
Clutch declared	Independent dry double clutch	Dry SAME double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	8.3 gpm · 31.5 L/min	—
Pressure declared	—	2,596 psi · 179 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,043 lb · 1,834 kg	+31% D 6507 (C)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	6,063 lb · 2,750 kg	+9% D-470 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	90.8 in · 2,307 mm	+9% D-470 (A)
Length declared	148.0 in · 3,760 mm	130.0 in · 3,302 mm	+14% D 6507 (C)
Width declared	81.1 in · 2,060 mm	69.7 in · 1,770 mm	+16% D 6507 (C)
Height declared	96.5 in · 2,450 mm	94.9 in · 2,410 mm	—
Ground clearance declared	19.3 in · 490 mm	17.3 in · 440 mm	+11% D 6507 (C)
Turning radius, braked declared	11.7 ft · 3.58 m	—	—
Fuel tank declared	74.0 qt · 70 L	63.4 qt · 60.0 L	+17% D 6507 (C)

Source

Source