Deutz-Fahr D 6507 (C) vs Ford 4830 (A)

12 material differences

Tractor one

1982–1984

No measured PTO figure

Tractor two

1990–1992

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the 4830 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and Ford 4830 (A), field by field
Field	D 6507 (C)	4830 (A)	Gap
Engine
Engine power, claimed claimed	62 hp	64.1 hp	—
Engine declared	KHD F4L 912	Ford L 256 CID-NA	differs
Displacement declared	3.77 L	4.19 L	+11% 4830 (A)
Maximum torque declared	174 lb·ft · 236 N·m	184 lb·ft · 250 N·m	+6% 4830 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	Pedal-operated dry AP single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	8.4 gpm · 31.8 L/min	9.3 gpm · 35.3 L/min	+11% 4830 (A)
Pressure declared	—	1,378–1,450 psi · 95–100 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,381 lb · 1,987 kg	+21% D 6507 (C)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	6,526 lb · 2,960 kg	+17% 4830 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	89.6 in · 2,276 mm	+7% 4830 (A)
Length declared	148.0 in · 3,760 mm	143.7 in · 3,650 mm	—
Width declared	81.1 in · 2,060 mm	69.7 in · 1,771 mm	+16% D 6507 (C)
Height declared	96.5 in · 2,450 mm	100.3 in · 2,548 mm	—
Ground clearance declared	19.3 in · 490 mm	12.0 in · 305 mm	+61% D 6507 (C)
Turning radius, braked declared	11.7 ft · 3.58 m	—	—
Fuel tank declared	74.0 qt · 70 L	69.4 qt · 65.7 L	+7% D 6507 (C)

Source

Source