Deutz-Fahr D 6207 (C) vs Steyr 760 (a)

12 material differences

Tractor one

1981–1982

No measured PTO figure

Tractor two

1971–1976

No measured PTO figure

Which should you choose?

Read our verdict on the D 6207 (C) and the 760 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Steyr 760 (a), field by field
Field	D 6207 (C)	760 (a)	Gap
Engine
Engine power, claimed claimed	59 hp	59.3 hp	—
Engine declared	KHD F4L 912	Steyr WD-408.40	differs
Displacement declared	3.77 L	3.14 L	+20% D 6207 (C)
Maximum torque declared	169 lb·ft · 229 N·m	159 lb·ft · 216 N·m	+6% D 6207 (C)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	8.9 gpm · 33.6 L/min	—
Pressure declared	—	2,489 psi · 172 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,291 lb · 2,400 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,919 lb · 2,685 kg	+6% 760 (a)
Maximum permissible mass declared	8,818 lb · 4,000 kg	9,921 lb · 4,500 kg	+13% 760 (a)
Wheelbase declared	83.7 in · 2,125 mm	83.9 in · 2,130 mm	—
Length declared	148.0 in · 3,760 mm	139.4 in · 3,540 mm	+6% D 6207 (C)
Width declared	81.1 in · 2,060 mm	72.2 in · 1,834 mm	+12% D 6207 (C)
Height declared	97.6 in · 2,480 mm	91.1 in · 2,314 mm	+7% D 6207 (C)
Ground clearance declared	20.9 in · 530 mm	18.5 in · 469 mm	+13% D 6207 (C)
Turning radius, braked declared	11.9 ft · 3.63 m	11.5 ft · 3.50 m	—
Fuel tank declared	74.0 qt · 70 L	87.7 qt · 83.0 L	+19% 760 (a)

Source

Source