Deutz-Fahr AgroXtra 4.57 or SOMECA 880-5 (TD)?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz-Fahr AgroXtra 4.57: hydraulic flow and three-point lift. It is also ahead on top speed and PTO speeds.

  • The Deutz-Fahr AgroXtra 4.57 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.
  • The Deutz-Fahr AgroXtra 4.57 suits loader and hydraulic implement work better on this data: 14% (5.9 L/min / 1.6 gpm) more hydraulic flow and 83% (2,360 kg / 5,203 lb) more three-point lift.
  • The Deutz-Fahr AgroXtra 4.57 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroXtra 4.57 and SOMECA 880-5 (TD), with the call on each
QuestionAgroXtra 4.57880-5 (TD)Call
Which puts more power through the PTO shaft?62 kW (83 hp)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”60.4 kW (81.0 hp)Traktorenlexikon, “Someca 880-5”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroXtra 4.57 and the 880-5 (TD).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the AgroXtra 4.57 and the 880-5 (TD).
Which pumps more oil for implements?47.3 L/min (12.5 gpm)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”41.4 L/min (10.9 gpm)Traktorenlexikon, “Someca 880-5”AheadThe Deutz-Fahr AgroXtra 4.57 has 14% more hydraulic flow (5.9 L/min / 1.6 gpm) than the SOMECA 880-5 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”2,840 kg (6,261 lb)Traktorenlexikon, “Someca 880-5”AheadThe Deutz-Fahr AgroXtra 4.57 has 83% more lift (2,360 kg / 5,203 lb) than the SOMECA 880-5 (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,780 kg (8,333 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”3,845 kg (8,477 lb)Traktorenlexikon, “Someca 880-5”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,600 kg (14,551 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”—No figureNo call on maximum permissible mass: no figure on record for the 880-5 (TD).
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”12 to 16Traktorenlexikon, “Someca 880-5”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the AgroXtra 4.57 and the 880-5 (TD).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”25 km/h (15.5 mph)Traktorenlexikon, “Someca 880-5”AheadThe Deutz-Fahr AgroXtra 4.57 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 880-5 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”540/1000 rpmTraktorenlexikon, “Someca 880-5”AheadThe Deutz-Fahr AgroXtra 4.57 offers 750 rpm at the PTO, which the SOMECA 880-5 (TD) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”independentTraktorenlexikon, “Someca 880-5”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroXtra 4.57”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 880-5”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1990–19951980–1983Ahead (a fact, not an advantage)The Deutz-Fahr AgroXtra 4.57 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroXtra 4.57 has 14% more hydraulic flow (5.9 L/min / 1.6 gpm) than the SOMECA 880-5 (TD) (both pump flow, as stated by the source).
  • The Deutz-Fahr AgroXtra 4.57 has 83% more lift (2,360 kg / 5,203 lb) than the SOMECA 880-5 (TD) (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr AgroXtra 4.57 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 880-5 (TD) (both top speed forward, as stated by the source).
  • The Deutz-Fahr AgroXtra 4.57 offers 750 rpm at the PTO, which the SOMECA 880-5 (TD) does not (as stated by the sources).
  • The Deutz-Fahr AgroXtra 4.57 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources