Deutz-Fahr AgroXtra 3.57 vs Massey Ferguson MF 575 (A)

11 material differences · fewer than 12

Tractor one

1991–1996

No measured PTO figure

Tractor two

1976–1983

No measured PTO figure

Which should you choose?

Read our verdict on the AgroXtra 3.57 and the MF 575 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 3.57 and Massey Ferguson MF 575 (A), field by field
Field	AgroXtra 3.57	MF 575 (A)	Gap
Engine
Engine power, claimed claimed	58.9 hp	65.2 hp	+11% MF 575 (A)
Engine declared	KHD F3L 913	Perkins A 4.236	differs
Displacement declared	3.06 L	3.87 L	+26% MF 575 (A)
Maximum torque declared	144 lb·ft · 195 N·m	198 lb·ft · 268.2 N·m	+38% MF 575 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent, dry double clutch	Pedal-operated, dry and air-cooled single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	16.5 gpm · 62.5 L/min	+64% MF 575 (A)
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,630 lb · 2,100 kg	+14% AgroXtra 3.57
Rear PTO speeds declared	540/1000/750 rpm	540/1686 rpm	differs
Weight & dimensions
Unladen weight declared	7,253 lb · 3,290 kg	6,923 lb · 3,140 kg	—
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	81.9 in · 2,079 mm	87.5 in · 2,222 mm	+7% MF 575 (A)
Length declared	144.9 in · 3,680 mm	149.2 in · 3,790 mm	—
Width declared	73.7 in · 1,872 mm	74.0 in · 1,880 mm	—
Height declared	96.9 in · 2,460 mm	98.8 in · 2,510 mm	—
Ground clearance declared	14.0 in · 355 mm	15.4 in · 390 mm	+10% MF 575 (A)
Turning radius, braked declared	11.8 ft · 3.60 m	12.3 ft · 3.74 m	—
Fuel tank declared	87.7 qt · 83 L	103.8 qt · 98.2 L	+18% MF 575 (A)

Source

Source