Deutz-Fahr AgroXtra 3.57 vs Fiat 65-56 LM (DT)

10 material differences · fewer than 12

Tractor one

1991–1996

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the AgroXtra 3.57 and the 65-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 3.57 and Fiat 65-56 LM (DT), field by field
Field	AgroXtra 3.57	65-56 LM (DT)	Gap
Engine
Engine power, claimed claimed	58.9 hp	64.1 hp	+9% 65-56 LM (DT)
Engine declared	KHD F3L 913	Fiat 8045.06.220 or 320	differs
Displacement declared	3.06 L	3.61 L	+18% 65-56 LM (DT)
Maximum torque declared	144 lb·ft · 195 N·m	151 lb·ft · 205 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent, dry double clutch	Dry LuK or VALEO double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.0 gpm · 38.0 L/min	8.7 gpm · 32.8 L/min	+16% AgroXtra 3.57
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	3,847 lb · 1,745 kg	+38% AgroXtra 3.57
Rear PTO speeds declared	540/1000/750 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,253 lb · 3,290 kg	5,004 lb · 2,270 kg	+45% AgroXtra 3.57
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	81.9 in · 2,079 mm	85.3 in · 2,167 mm	—
Length declared	144.9 in · 3,680 mm	141.7 in · 3,600 mm	—
Width declared	73.7 in · 1,872 mm	71.7 in · 1,820 mm	—
Height declared	96.9 in · 2,460 mm	95.3 in · 2,420 mm	—
Ground clearance declared	14.0 in · 355 mm	18.9 in · 480 mm	+35% 65-56 LM (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	11.5 ft · 3.51 m	—
Fuel tank declared	87.7 qt · 83 L	63.4 qt · 60.0 L	+38% AgroXtra 3.57

Source

Source