Deutz-Fahr AgroXtra 3.57 vs Deutz-Fahr DX 3.50

6 material differences · fewer than 12

Tractor one

1991–1996

No measured PTO figure

Tractor two

1984–1996

No measured PTO figure

Which should you choose?

Read our verdict on the AgroXtra 3.57 and the DX 3.50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 11 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 3.57 and Deutz-Fahr DX 3.50, field by field
Field	AgroXtra 3.57	DX 3.50	Gap
Engine
Engine power, claimed claimed	58.9 hp	59 hp	—
Engine declared	KHD F3L 913	KHD F3L 913	—
Displacement declared	3.06 L	3.06 L	—
Maximum torque declared	144 lb·ft · 195 N·m	144 lb·ft · 195 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent, dry double clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	10.0 gpm · 38.0 L/min	10.0 gpm · 38.0 L/min	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,291 lb · 2,400 kg	—
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,253 lb · 3,290 kg	6,019–6,878 lb · 2,730–3,120 kg	differs
Maximum permissible mass declared	9,921 lb · 4,500 kg	10,141 lb · 4,600 kg	—
Wheelbase declared	81.9 in · 2,079 mm	79.2 in · 2,012 mm	—
Length declared	144.9 in · 3,680 mm	142.9 in · 3,630 mm	—
Width declared	73.7 in · 1,872 mm	84.2 in · 2,138 mm	+14% DX 3.50
Height declared	96.9 in · 2,460 mm	92.5–103.1 in · 2,350–2,620 mm	differs
Ground clearance declared	14.0 in · 355 mm	18.0 in · 457 mm	+29% DX 3.50
Turning radius, braked declared	11.8 ft · 3.60 m	11.8 ft · 3.60 m	—
Fuel tank declared	87.7 qt · 83 L	—	—

Source

Source