Deutz-Fahr Agrotron K 110 (Profiline) or Fendt Favorit 510 C?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron K 110 (Profiline) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron K 110 (Profiline) | Favorit 510 C | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 76.5 kW (102.6 hp)Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | 76.9 kW (103.1 hp)Traktorenlexikon, “Fendt Favorit 510 C” | Not comparableNot comparable on power at the PTO shaft: the Agrotron K 110 (Profiline) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron K 110 (Profiline) and the Favorit 510 C. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron K 110 (Profiline) and the Favorit 510 C. |
| Which pumps more oil for implements? | — | 102.0 L/min (26.9 gpm)Traktorenlexikon, “Fendt Favorit 510 C” | No figureNo call on hydraulic flow: no figure on record for the Agrotron K 110 (Profiline). |
| Which lifts more on the three-point hitch? | 6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | 5,508 kg (12,143 lb)Traktorenlexikon, “Fendt Favorit 510 C” | Not comparableNot comparable on three-point lift: the Agrotron K 110 (Profiline): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron K 110”); the Favorit 510 C: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Favorit 510 C”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,850 kg (10,692 lb)Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | 4,970 kg (10,957 lb)Traktorenlexikon, “Fendt Favorit 510 C” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 8,000 kg (17,637 lb)Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | — | No figureNo call on maximum permissible mass: no figure on record for the Favorit 510 C. |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | 44Traktorenlexikon, “Fendt Favorit 510 C” | AheadThe Fendt Favorit 510 C has 83% more forward gears (20 gears) than the Deutz-Fahr Agrotron K 110 (Profiline) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | YesTraktorenlexikon, “Fendt Favorit 510 C” | No figureNo call on a creeper range: not stated for the Agrotron K 110 (Profiline). |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron K 110” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 510 C” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron K 110” | 540 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 510 C” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron K 110” | — | No figureNo call on PTO independence: not stated for the Favorit 510 C. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron K 110” | 4WDTraktorenlexikon, “Fendt Favorit 510 C” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2005–2008 | 1993–2000 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron K 110 (Profiline) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt Favorit 510 C has 83% more forward gears (20 gears) than the Deutz-Fahr Agrotron K 110 (Profiline) (both forward gears, as stated by the source).
- The Deutz-Fahr Agrotron K 110 (Profiline) is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrotron K 110 (Profiline) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agrotron K 110 (Profiline): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron K 110”); the Favorit 510 C: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Favorit 510 C”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources