5 material differences · fewer than 12

Tractor oneDeutz-Fahr Agrotron K 110 (Profiline)2005–2008No measured PTO figureTractor twoFendt Favorit 510 C1993–2000No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron K 110 (Profiline) and the Favorit 510 C → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron K 110 (Profiline) and Fendt Favorit 510 C, field by field
Field	Agrotron K 110 (Profiline)	Favorit 510 C	Gap
Engine
Engine power, claimed claimed	102.6 hp	103.1 hp	—
Engine declared	Deutz BF6M 2012 C	MWM TD 226. B-4	differs
Displacement declared	6.06 L	4.16 L	+46% Agrotron K 110 (Profiline)
Maximum torque declared	308 lb·ft · 418 N·m	308 lb·ft · 417 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	—	Wet multi-disc drive clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	26.9 gpm · 102.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	10,692 lb · 4,850 kg	10,957 lb · 4,970 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	104.2 in · 2,647 mm	91.9 in · 2,333 mm	+13% Agrotron K 110 (Profiline)
Length declared	171.9 in · 4,367 mm	164.6 in · 4,180 mm	—
Width declared	88.8 in · 2,256 mm	89.8 in · 2,280 mm	—
Height, over the cab declared	104.7 in · 2,660 mm	110.0 in · 2,795 mm	—
Ground clearance declared	19.1 in · 485 mm	21.1 in · 536 mm	+11% Favorit 510 C
Turning radius, braked declared	—	13.1 ft · 4.00 m	—
Fuel tank declared	190.2 qt · 180 L	142.7 qt · 135 L	+33% Agrotron K 110 (Profiline)

Source

Source